MATERIAL SPECIFICATION

05/08/2001

TYPE : PVC 830

APPLICATION: : GENERAL PURPOSE INSULATION AND SHEATH
STANDARDS: BS 6746 TI1 ,TI2 , TM1 , TM2 , TYPE 9 . DIN/VDE 0207 YI1 , YI2 , YM1 , YM2 , YM5 IEC 502 ST-2

PROPERTIES	TEST METHOD	UNITS	STANDARD	MEASURE
DENSITY	ASTM D792	gr/cm³		1.43
HARDNESS	ASTM D 2240	SHORE A		86
TENSILE STG.	ASTM D 638	n/mm²	12.50	17
ELONGATION	ASTM D 638	%þ	150.00	320
THERMAL STAB.	200°C.	minutes	80`	200
L.O.I.		%		22.6

AGING PROPERTIES - 100°C 168 HOURS

PROPERTIES	TEST METHOD	UNITS	STANDARD	MEASURE
TENSILE STG. min.	ASTM D638	n/mm²	12.5	17
Variation max.		%þ	+/-25 %	0
ELONGATION min.	ASTM D 638	%þ	150	280
Variation max.		%þ	+/-25 %	-15
LOSS of MASS	BS 6469
Variation max.		mg/cm²	-1.5	-1